MODEL 3640E SKID LOADER PRINTABLE SPECS >>
Lean, Mean Working Machines.
With a powerful Yanmar diesel engine, the new 3640E model is a "little giant" that maneuvers easily in tight places and handles tough construction, agriculture and landscaping challenges with ease.
- Rated Operating Load (kg): 1,050 lbs. (476)
- Net Power (kW): 35 hp (26) @2600 rpm
- Overall Operating Height (Fully Raised): 139.6” (3546)
- Overall Width: 48.4” (1229)
- Length w/55" bucket: 114” (2896)
- Click here for complete specs>>
STANDARD EQUIPMENT
- Adjustable Seat
- Adjustable Seatbelt
- All-Tach™ Attachment System
- Battery Charge Indicator Lamp
- Controls: T-bar "Hands-only, Hand-Foot
- Coolant Temperature Gauge
- Dual-Element Air Cleaner with Visual Indicator
- Dual Front and Rear Work Lights
- Engine Intake Air Pre-Heater Starting Assist (Manual)
- Foot (T-Bar controls only) and Hand Throttle
- Front Auxiliary Hydraulics with ¾-inch Flat-faced couplers
- Fuel Gauge
- Headliner and Accoustical Interior
- Hourmeter
- Hydraloc System – Brakes and Interlock for Starter, Lift/Tilt Cylinders, Auxiliary Hydraulics and Wheel Drives
- Independent Hydraulic Reservoir and Hydraulic Oil Cooler
- Lift Arm Support Device
- Low Oil Pressure Light and Buzzer
- Manual Control Hydrostatic Drive
- Number 80K Chain Drive
- Operator Restraint Bar with Armrests
- Power Plug (12V)
- Powerview® Lift Arm
- Removeable Belly Plate and Access Cover
- ROPS/FOPS Level II
- Seatbelt Indicator Lamp and Buzzer
- Spark Arrestor Muffler
- Top and Rear Windows
- Vandalism Lock Provisions
- Visual Hydraulic Filter Indicator
- Warning Lamps and Buzzer – Engine and Hydraulic Oil Temperature
OPTIONAL EQUIPMENT
- 3-inch Wide Seatbelt – When Required
- Audible Back-up Alarm
- Battery Disconnect Switch
- Bucket Bolt-on Cutting Edge
- Cab Door with Wiper and Dome Light
- Centrifugal Pre-Cleaner
- Deluxe Sound Package
- Diesel Engine Exhaust Purifier
- Engine Auto-Shutdown System
- Engine Block Heater
- Fenders
- Four-Point Lift Kit
- Heater/Defroster
- Horn
- Hydraulic Coupler Kit
- Impact-Resistant Door
- Interior Dome Light
- Rear Counterweight
- Rear View Mirror
- Single-Point Lift Kit
- Self-Leveling Lift Action
- Sliding Side Windows
- Strobe Light
- Suspension Seat
BUCKETS AND CAPACITIES
3640E SPECIFICATIONS
| SL3640E | |
| DIMENSIONS | |
| Overall Operating Height (mm) | 139.6" (3546) |
| Height to Hinge Pin (fully raised) (mm) | 108.1" (2746) |
| Overall Height (to top of ROPS) (mm) | 70.3" (1786) |
| Ground Clearance to Chassis (mm) | 6" (152) |
| Overall Length (mm) | 114" (2896) w/55" bucket |
| Overall Length (w/o bucket) | 88.9" (2258) |
| Wheelbase (mm) | 34.5" (876) |
| Dump Reach (full height) (mm) | 22.8" (579) |
| Rollback at Ground | 29° |
| Dump Angle | 42° |
| Overall Width (mm) | 48.4" (1229) |
| Bucket Width (mm) | 55.3" (1404) |
| Clearance Circle (rear) (mm) | 54.1" (1374) |
| Clearance Circle (front, w/o bucket) (mm) | 44.1" (1120) |
| Clearance Circle (front, w/bucket) (mm) | 69.4" (1763) |
| Seat to Ground Height (mm) | 32.6" (828) |
| Rollback at Full Height (mm) | 99° |
| Dump Height (mm) | 84.5" (2146) |
| Departure Angle | 26° |
| Standard Tire Size | 27x8.5x15 HD |
| ENGINE | |
| Make | Yanmar |
| Model | 3TNV88 |
| Net Power (kW) @ rpm | 35 hp (26) @ 2600 |
| Displacement (L) | 100 cu.in. (1.64) |
| HYDRAULIC SYSTEM | |
| Auxiliary Hydraulics - Standard (L/min) | 14.5 gpm (55) |
| Filtration | 4 micron |
| Reservoir Capacity (L) | 8 gal. (30.3) |
| ELECTRICAL SYSTEM | |
| Battery | 12-volt (675 CCA) |
| Starter (kW) | 12-volt (2.3) |
| Alternator | 40-amp. |
| CAPACITIES AND WEIGHTS | |
| Rated Operating Load (kg) | 1050 lbs. (476) |
| Rated Operating Load with opt. Counterweight (kg) | 1175 lbs. (533) |
| Tipping Capacity (kg) | 2100 lbs. (952) |
| Fuel Tank (L) | 10.3 gal. (38.9) |
| Travel Speed (km/h) | 6.8 mph (10.9) |
| Operating Weight - approx. (kg) | 4000 lbs. (1814) |
MODEL 3640E
FEATURES
Choice of Controls: Hand/Foot Controls
Choice of Controls: T-Bar "Hands-Only" Controls
Low-profile design for maneuverability in narrow, low-clearance areas
All-Tach® attachment mounting system for compatibility with most attachments
Optional counterweight increases rated operating load from 1050 lbs. (476 kg) to 1175 lbs. (533 kg)