MODEL 6640E SKID LOADER PRINTABLE SPECS >>
Versatility and Efficiency without compromise
Get the versatility and efficiency of a true workhorse without compromising comfort with the Model 6640E. Powerful Deutz engines and exceptional hydraulic power get the job done faster.
- Rated Operating Load (kg): 2600 lbs. (1179)
- Net Power (kW): 82 hp (61) @2500 rpm
- Overall Operating Height (Fully Raised): 168.3” (4274)
- Overall Width: 72.5” (1841)
- Length w/74" bucket: 141.5” (3594)
- Click here for complete specs>>
STANDARD EQUIPMENT
- Accoustical Material and Headliner
- Adjustable Operator Restraint Bar with Armrests
- All-Tach™ Attachment System: Two-Lever (manual)
- Anti-Vandalism Rear Door
- Battery Charge Indicator Lamp
- Bi-directional Auxiliary Hydraulics with Flat-Faced Couplers
- Controls: T-bar "Hands-only, Hand/Foot, Dual Hand, or T-Bar Joystick (4640E Turbo only)
- Coolant Temperature Gauge and Indicator Light
- Dual-Element Air Cleaner with Visual Indicator
- Dual Front and Rear Halogen Work Lights and Dual Tail Lights
- Engine Auto-Shutdown System
- Foot Throttle (T-Bar and Dual Hand only)
- Fuel Level Gauge
- Hourmeter
- Hydraloc™ System – Brakes and Interlock for Starter, Lift/Tilt Cylinders, Auxiliary Hydraulics and Wheel Drives
- Interior Dome Light
- Oil Pressure Indicator Light
- Powerview® Lift Arm
- Pre-Heat Starting Assist
- ROPS/FOPS ISO Level II
- Seatbelt Indicator Light and Buzzer
- Self-Leveling Lift Action
- Servo-Controlled Hydrostatic Drive
- Skid Plate for Clean Out
OPTIONAL EQUIPMENT
- 2-speed Transmission
- 3-inch Wide Seatbelt – When Required
- Audible Back-up Alarm
- Adjustable Suspension Seat
- Bi-directional High-Flow Auxiliary Hydraulics with Flat-Faced Couplers
- Bucket Bolt-on Cutting Edge Kits
- Centrifugal Pre-Cleaner
- Engine Pan Heater
- Four-point Lift Kit
- Front Door with Wiper
- Horn
- Hydraulic Couplers Kit
- Hydraulic Oil Filter Indicator Light
- Hydraglide™ Ride Control System
- Impact-Resistant Front Door
- Operator's Compartment Heater/ Defroster/Air Conditioner
- Power-A-Tach™ Attachment Mounting System
- Rear-View Mirror
- Single-point Lift Kit
- Sliding Side Windows
- Spark Arresting Muffler
- Strobe Light
- Upper-torso Restraint (required with 2-speed transmission)
BUCKETS AND CAPACITIES
6640E SPECIFICATIONS
| SL6640E | |
| DIMENSIONS | |
| Overall Operating Height (mm) | 168.3" (4274) |
| Height to Hinge Pin (fully raised) (mm) | 124.3" (3157) |
| Overall Height (to top of ROPS) (mm) | 82.0" (2082) |
| Ground Clearance to Chassis (mm) | 9.1" (231) |
| Overall Length (mm) | 141.5" (3594) w/74" bucket |
| Overall Length (w/o bucket) | 101.0" (2565) |
| Wheelbase (mm) | 48.4" (1219) |
| Dump Reach (full height) (mm) | 34.3" (863) |
| Rollback at Ground | 30° |
| Dump Angle | 40° |
| Overall Width (mm) | 72.5" (1841) |
| Bucket Width (mm) | 74" - 90 " (1880 - 2286) |
| Clearance Circle (rear) (mm) | 69.0" (1753) |
| Clearance Circle (front, w/o bucket) (mm) | 54" (1372) |
| Clearance Circle (front, w/bucket) (mm) | 90.5" (2299) |
| Seat to Ground Height (mm) | 43.3" (1100) |
| Rollback at Full Height (mm) | 84° |
| Dump Height (mm) | 94.8" (2408) |
| Departure Angle | 29° |
| Standard Tire Size | 14.00x17.5 HD |
| ENGINE | |
| Make | Deutz |
| Model | BF4M2011 |
| Net Power (kW) @ rpm | 82 hp (61) @ 2500 |
| Displacement (L) | 190 cu.in. (3.1) |
| HYDRAULIC SYSTEM | |
| Auxiliary Hydraulics - Standard (L/min) | 23 gpm (87) |
| High-Flow Hydraulics - Optional (L/min) | 36 gpm (136) |
| Filtration | 3 micron |
| Reservoir Capacity (L) | 16 gal. (60) |
| ELECTRICAL SYSTEM | |
| Battery | 12-volt (950 CCA) |
| Starter (kW) | 12-volt (2.3) |
| Alternator | 95-amp. |
| CAPACITIES AND WEIGHTS | |
| Rated Operating Load (kg) | 2600 lbs. (1179) |
| Rated Operating Load with opt. Counterweight (kg) | 2900 lbs. (1315) |
| Tipping Capacity (kg) | 5200 lbs. (2359) |
| Fuel Tank (L) | 24 gal. (91) |
| Travel Speed w/Joystick (km/h) | 8.6 mph (13.8) |
| - with 2-speed drive option (km/h) | 13.1 mph (21.1) |
| Travel Speed w/o Joystick (km/h) | 9.2 mph (14.8) |
| - max. (km/h) | 13.9 mph (22.4) |
| Operating Weight - approx. (kg) | 7800 lbs. (3538) |
MODEL 6640E
FEATURES
Choice of Controls: Dual-Hand controls 
Choice of Controls: Hand/Foot controls 
Choice of Controls: T-Bar "Hands-only" controls 
Choice of Controls: NEW Joystick controls (4640E Turbo only) 
Optional counterweight increases rated operating load from 2600 lbs. (1179 kg) to 2900 lbs. (1315 kg)
Optional High-Flow Hydraulics increases hydraulic flow from 23 gpm (87 L/min) to 36 gpm (136 L/min)
Optional Front Door with wiper and heater or air conditioner/ heater combination increases operator comfort
All-Tach® attachment mounting system for compatibility with most attachments 