CTL80 COMPACT TRACK LOADER PRINTABLE SPECS >>
Work Tirelessly.
Compact Track Loaders from Gehl feature fewer moving parts, which means fewer problems. Its simple, yet straightforward design fully supports the track drives and rollers, resulting in a machine that excels in soft or muddy conditions. And its high ground clearance adds even greater mobility in soft or uneven terrain.
- Rated Op. Load - 50% Tipping Cap. (kg): 3528 lbs. (1600)
- Rated Op. Load - 35% Tipping Cap, (kg): 2470 lbs. (1120)
- Horsepower (kW): 97 hp (72) @ 2200 rpm
- Maximum Lift Height (mm): 126" (3203)
- Width - w/bucket (mm): 84” (2134)
- Length w/ bucket (mm): 159” (4026)
- Click here for complete specs>>
STANDARD EQUIPMENT
- All-Tach™ Attachment Mounting System
- Back-up Alarm
- Dual-Element Air Cleaner with Indicator
- Dual, interior cab-mounted rear view mirrors
- Electric Switch Auxiliary Hydraulic Control
- Electrohydraulic Push Button - Lift Arm Float Feature
- Elevated Planetary Final Drives with SAHR Disc Brakes
- Engine Automatic Shutdown System
- Fuel, Engine, Temperature and Hourmeter Gauges
- Full Suspension Seat - 6-way Adjustable
- Glow Plug Starting
- Hand Throttle
- Horn
- Hydraulic Self-Leveling
- Independent Hydraulic Reservoir with Cooler
- Interlock System for Lift, Tilt Cylinders, Auxiliary Hydraulic Functions and Drives
- Joystick (Hydraulic Pilot-operated) "Hands-Only" controls
- Mechanical Lift Cylinder Lock
- Operator Restraint Bar with Armrests and Adjustable Seatbelt
- Operational Lights - Two front, two rear halogen lights
- ROPS/FOPS - Level I Approved Overhead Guard
- Rubber Track Undercarriage System
- Servo-Controlled Hydrostatic Drive
- Swing-Out Radiator and Hydraulic Oil Cooler
- Two-Speed Hydrostatic Drive System
- Vandalism Lock Provisions - Engine Cover/Rear Door/Fuel Cap
- Warning Lights
- Yanmar Liquid-Cooled Diesel Engine
OPTIONAL EQUIPMENT
- Generation II Heating and Air-Conditioning with Sealed and Pressurized Cab
- Dual Hand Controls
- Foot Throttle Kit
CTL80 SPECIFICATIONS
| CTL80 | |
| ENGINE | |
| Make | Yanmar |
| Model | 4TNV106T |
| Aspiration | Turbo-charged |
| Displacement (L) / cylinder | 269 cu.in. (4.4) / 4 |
| Horsepower (kW) @ rpm | 97 hp (72) @ 220 |
| Maximum Torque (Nm) @ rpm | 291 ft.-lbs. (393) @ 1400 |
| PERFORMANCE | |
| Tipping Capacity - SAE J732 (kg) | 7056 lbs. (3200) |
| Rated Operating Load | |
| SAE J818 @ 50% Tipping Capacity (kg) | 3528 lbs. (1600) |
| SAE J818 @ 35% Tipping Capacity (kg) | 2470 lbs. (1120) |
| Breakout Force (kN) | |
| - Bucket | 8692 lbs. (38.6) |
| - Lift Arm | 8549 lbs. (38.0) |
| ELECTRICAL | |
| Battery/CCA | 12-volt / 660 |
| Alternator | 60 amp |
| UNDERCARRIAGE | |
| Traction Pump/Traction Drive | Piston / Planetary |
| Traction Braking | Hydraulic |
| Drawbar Pull (kN) | 13,066 lbf (58.1) |
| Roller Type / Track Rollers - Each Side | Steel / 5 |
| Track Width | 18" (457) |
| Track Contact Length | 63" (1598) |
| Ground Pressure (kg/cm²) | 4.3 psi (0.30) |
| Travel Speed | |
| - Low | 0-5.0 mph (0-8) |
| - High | 0-6.9 mph (0-10.3) |
| HYDRAULIC SYSTEM | |
| Operating Pressure (bar) | 2988 psi (206 ) |
| Auxiliary Hydraulic Flow - standard (L/min) | 23.4 gpm (88.6) |
| Auxiliary Hydraulic Flow - opt. High Flow | 39.6 gpm (149) |
| CAPACITIES | |
| Fuel Tank (L) | 28.5 gal. (107.9) |
| Hydraulic Reservoir (L) | 16.9 gal. (64) |
| Engine Oil (L) | 14.8 qts. (14) |
| Engine Coolant (L) | 16.0 qts. (15.1) |
| DIMENSIONS AND WEIGHTS | |
| Operating Weight - Approximate (kg) | 10,692 lbs. (4850) |
| Maximum Lift Height to Bucket Pin (mm) | 123" (3124) |
| Dump Height (mm) | 94" (2375) |
| Reach at Maximum Lift (mm) | 41" (1049) |
| Dump Angle | 37° |
| Bucket Rollback at Ground Level (mm) | 32° |
| Length - Without Bucket (mm) | 122" (3106) |
| Length - With Bucket (mm) | 159" (4026) |
| Ground Clearance (mm) | 14.3" (363) |
| Angle of Departure | 28° |
| Height - to top of ROPS (mm) | 87" (2217) |
| Width - Without Bucket (mm) | 73" (1884) |
| Width - With Bucket (mm) | 84" (2134) |
| Rear Clearance Radius (mm) | 72" (1816) |
| Front Clearance Radius - With Bucket (mm) | 106" (2692) |
| BUCKET | |
| Mounting | Universal Quick-Attach |
| Capacity - SAE Heaped (m³) | 22.0 cu. ft. (0.63) |
MODEL CTL80
FEATURES
Dedicated undercarriage provides better power to the ground for pushing and tractive power 
Large operator's compartment is ROPS/FOPS certified with plenty of leg and shoulder room for maximum operator comfort 
Generation II heating and air-conditioning package provides sealed and pressurized cabs for a cleaner environment 
Pilot-operated joystick controls make operation smoother and lifting and tilting functions more precise 
Engine cover and rear door and rear door protect components and open for easy access to engine, air cleaner and more