5640E Skid Loader

  • Height to Hinge Pin - Fully Raised (mm): 123" (3124)
  • Rated Operating Capacity (kg): 2,200 lbs. (998)
  • Net Power (kW): 70.7 hp (52.7)
Find a Dealer Request More Info

Performance

The 5640E skid loader is built for efficiency. Super Hi-Power drive chains feature heavy, high-strength construction designed for the most rugged conditions.

  • Longer wheelbase and a low center-of-gravity offer a smooth, stable ride.
  • Hydraloc™ automatic interlock system locks lift, tilt and drive systems when the operator leaves the seat, increasing operator safety. System also engages when the restraint bar is raised or the ignition switch is turned off.
  • Lift arm hydraulic tubes are concealed and protected from the work environment.
  • Rated operating load can be readily increased with the addition of a counterweight.

Operator's Cabin

Now with one of the quietest cabs in the industry, the 5640E provides a little peace and quiet on a congested job site.

  • Innovative acoustical materials reduce interior cab sound levels.
  • Newly-designed engine-related components lower sound levels, both inside and out.
  • Compact muffler design reduces engine exhaust noise.
  • ROPS/FOPS Level II is standard for extra operator protection.
  • Roof grid section and window provide excellent bucket visibility at full height.
  • Adjustable operator restraint bar offers secondary protection and serves as a padded armrest.
  • Lockout system shuts down lift/tilt functions when optional front door is opened.

Controls

Ergonomic controls in the 5640E skid loader provide smooth loader and attachment operation.

  • T-bar hand, dual-hand, hand/foot controls are standard equipment.
  • Optional joystick controls.

Engine

Advanced, high-powered, turbocharged Yanmar engine with auto-shutdown systems and grid heater starter assists to aid in cold weather starting.

Make Yanmar
Model 4TNV98T Interim Tier IV
Net Power (kW) @ rpm 70.7 hp (52.7) @ 2500
Maximum Torque (Nm) @ rpm 206 ft. lbs. (279.3) @ 1700
Displacement (L) 203 cu. in. (3.3)

Hydraulics

Exceptional hydraulics of 36.9 gpm (139.7 L/min) with optional high-flow power a wide variety of attachments and produce outstanding attachment performance.

Auxiliary Hydraulics - Standard (L/min) 21.8 gpm (82.5)
High-Flow Auxiliary Hydraulics - Option (L/min) 36.9 gpm (139.7)
Filtration 12 micron
Reservoir Capacity (L) 16 gal (60.6)


Lift Arm

Strong lift arm provides strength, durability and excellent view of the tires and sides of the loader for increased precision and safety.

  • High horsepower and powerful hydraulic systems provide the pressure and flow to power almost any attachment.
  • PowerView® Boom Lift Arm
  • All-Tach® (universal-style) attachment mounting system compatible with most allied attachments.

Serviceability

The 5640E skid loader has an ingenious design, including low-maintenance components and easy maintenance access.

  • Entire ROPS/FOPS structure pivots back, with gas-spring assist, for full, easy access to the internal hydraulic components.
  • Swing-open rear door and flip-up engine cover fully expose maintenance access points to engine, battery, filters and filler caps.
  • Maintenance-free axles are lubricated and sealed for long life.
  • Removable access plates for clean out.
Show Standard   Show Metric

Specifications (standard)

Dimensions

A  Overall Operating Height - Fully Raised 162"
B  Height to Hinge Pin - Fully Raised 123"
C  Overall Height to Top of ROPS 81.0"
D  Ground Clearance to Chassis 8.0"
E  Overall Length with Bucket 131" with 70" Bucket
F  Overall Length without Bucket 100.5"
G  Wheelbase 42.5"
H  Dump Height - Fully Raised 32"
I  Rollback at Ground 28°
J  Dump Angle 37°
K  Overall Width  69.0"
L  Bucket Width 70" - 90"
M  Clearance Circle - Rear 66.0"
N  Clearance Circle - Front without Bucket 50.5"
O  Clearance Circle - Front with Bucket 82.0"
P  Seat to Ground Height 42.0"
Q  Rollback at Specified Height 97°
R  Dump Height 93.5"
S  Departure Angle 26°
Standard Specification Tire Size 12.00 x 16.5 HD

Engine

Make Yanmar
Model 4TNV98T Interim Tier IV
Net Power @ rpm 70.7 hp @ 2500
Maximum Torque @ rpm 206 ft.lbs. @ 1650
Displacement 203 cu.in.

Hydraulic System

Auxiliary Hydraulics - Standard 21.8 gpm
High-Flow Auxiliary Hydraulics - Option 36.9 gpm
Filtration 12 micron
Reservoir Capacity 16 gal. 

Electrical System

Battery 12-volt
Starter 12-volt
Alternator 95-amp

Capacities/Weights

Rated Operating CapacityB 2,200 lbs.
Rated Operating Capacity with Optional CounterweightB 2,500 lbs.
Tipping Load 4,400 lbs.
Fuel Tank 19 gal.
Travel Speed - Maximum 8.1 mph
Travel Speed with Two-Speed Option - Maximum 12.3 mph
Operating WeightC - Approximate 7,610 lbs.

A - Narrow width with off-set wheel option

B - Per SAE J818, SAE J732, and ISO 14397

C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.

Gehl 4640E Power2 Specifications Diagram

Gehl 4640E Power2 Specifications Diagram Top

Specifications (metric)

Dimensions

A  Overall Operating Height - Fully Raised 4115 mm
B  Height to Hinge Pin - Fully Raised 3124 mm
C  Overall Height to Top of ROPS 2057 mm
D  Ground Clearance to Chassis 203 mm
E  Overall Length with Bucket 3327 mm with 1778 mm Bucket
F  Overall Length without Bucket 2553 mm
G  Wheelbase 1080 mm
H  Dump Reach - Fully Raised 813 mm
I  Rollback at Ground 28°
J  Dump Angle 37°
K  Overall Width  1753 mm
L  Bucket Width 1778 - 2286 mm
M  Clearance Circle - Rear 1676 mm
N  Clearance Circle - Front without Bucket 1283 mm
O  Clearance Circle - Front with Bucket 2083 mm
P  Seat to Ground Height 1067 mm
Q  Rollback at Specified Height 97°
R  Dump Height 2375 mm
S  Departure Angle 26°
Standard Specification Tire Size 12.00 x 16.5 HD

Engine

Make Yanmar
Model 4TNV98T Interim Tier IV
Net Power @ rpm 52.7 kW @ 2500
Maximum Torque @ rpm 279.3 Nm @ 1700
Displacement 3.3 L

Hydraulic System

Auxiliary Hydraulics - Standard 82.5 L/min
High-Flow Auxiliary Hydraulics - Option 139.7 L/min
Filtration 12 micron
Reservoir Capacity 60.6 L

Electrical System

Battery 950 CCA
Starter 3.0 kW
Alternator 95-amp

Capacities/Weights

Rated Operating CapacityB 998 kg
Rated Operating Capacity with Optional CounterweightB 1134 kg
Tipping Load 1996 kg
Fuel Tank 71.9 L
Travel Speed - Maximum 13 km/hr
Travel Speed with Two-Speed Option - Maximum 19.8 km/hr
Operating WeightC - Approximate 3452 kg

A - Narrow width with off-set wheel option

B - Per SAE J818, SAE J732, and ISO 14397

C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.

Gehl 4640E Power2 Specifications Diagram

Gehl 4640E Power2 Specifications Diagram Top

Options

Controls

T-Bar Hand Controls Available Standard
Hand/Foot Controls Available Standard
Joystick Controls Available Optional
Dual-Hand Controls Available Standard

Engine

Engine Auto-Shutdown System Standard
Engine Heater Optional
Turbocharged Engine Standard

Hydraulics

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional
Independent Hydraulic Reservoir Standard

Operator Station

Air-Conditioner Optional
Cab Enclosure Optional
Foot or Hand-Controlled Throttle Standard
Full Instrumentation Standard
Heater Optional
Horn Optional
Integral Access Plate (Removable) Standard
Restraint Bar with Padded Armrests/Seat Belts Standard
ROPS/FOPS Level II Overhead Guard, Integral Side Screens Standard
Sound Reduction Package Standard
Suspension Seat Optional
Work Lights, Front and Rear Standard

Performance

All-Tach® Attachment Mounting System Standard
Anti-Vandalism Protection Standard
Back-Up Alarm Optional
Brake Control (Auto/Manual) Standard
Hydraglide™ System Optional
Hydraloc™ System Standard
Hydrostatic Drive Standard
Lift Arm Support Device Standard
Narrow Offset Wheels
Self-Leveling Lift Action Standard
Skid Plate with Cleanout Standard
Two-Speed Drive Optional
Zero-Maintenance Axles Standard

Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter