V400 Vertical-Lift Skid Loader

  • Height to Hinge Pin - Fully Raised (mm): 144" (3647)
  • Rated Operating Capacity (kg): 4,000 lbs. (1814)
  • Power (kW): Gross 99 hp (74)
Find a Dealer Request More Info
Gehl Compact Equipment V400 Vertical Lift Skid Steer Loader The King

Performance

The Gehl V400 skid loader is a shining example of Gehl’s superior innovation and well thought-out product development.

  • The re-designed chassis aids in superior weight distribution, which further enhances stability.
  • Thick steel plating and heavy-duty pins and bushings strengthen the loader for heavy-duty work.
  • Electronic engine control and electronic foot and electronic hand throttles allow operation at partial throttle, reducing sound levels and fuel consumption (not available with hand/foot controls).
Height to Hinge Pin - Fully Raised (mm) 144" (3647)
Travel Speed with Standard Two-Speed (km/hr) 11.2 mph (18)

Operator's Cabin

The operator’s compartment on the V400 skid loader provides a safe and comfortable working environment for operators of all sizes.

  • Cab forward design enhances the view to the bucket. Level II FOPS is standard equipment.
  • Standard mechanical suspension seat and optional air-ride suspension seat provide enhanced levels of comfort.
  • New side-folding restraint bar and armrests with multiple adjustments enhance operator safety and comfort.
  • Extra-large side screens combined with a low-profile lift arm design provide a wide field-of-view to the side work areas.
  • Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner and quieter operating environment.
  • Domed, wide-view glass door option reduces glare and provides optimal visibility to the lift arm, work tool and front work area. Large top, front window provides a clear view of the lift arm in its higher lift positions.
  • Dome light, cup holder, 12-volt socket and storage tray.
  • LCD display replaces gauges and is customizable to user preference.
Gehl V400 Operator's Cabin

Controls

Gehl V400 Controls

Controls on the Gehl V400 skid loader are ergonomically designed to reduce operator fatigue and increase productivity.

  • Adjustable joystick handles provide ease of operator control with minimal effort, reducing fatigue.
  • New upper-left and upper-right instrument panels provide easy readout and switch access.
  • Pilot joystick controls or pilot hand/foot controls provide the ultimate in operator comfort, ease and controllability. Mechanical T-Bar controls are also available.
  • Infinitely adjustable proportional auxiliary hydraulics.
  • Hydraloc™ system applies brakes whenever the operator raises restraint bar, leaves the operator’s seat or switches off the ignition.

Engine

The Gehl V400 skid loader comes equipped with the power to tackle virtually any job.

  • Hydraulic fan with swing-out cooler reduces fuel consumption, reduces noise levels, and provides improved service access.
  • Automatic grid heater engine intake heating system provides superior cold-weather starting.
  • Engine has conventional water/ethylene glycol liquid-cooled design.
  • Engine servicing points are readily accessible.
  • Dual element filter and pre cleaner are standard.
Make Cummins
Model QSB 4.5 Tier III
Gross Power (kW) @ rpm 99 hp (74) @ 2,200
Maximum Torque (Nm) 326 ft.-lbs. (442) @ 1,300
Displacement (L) 272 cu.in. (4.5)
Gehl Vertical Lift Skid Loader Engine V400

Hydraulics

Gehl V400 Hydraulics

When maximum hydraulic power is needed to run demanding attachments, the V400 Skid Loader is equipped with the tools to get the job done right.

  • High system pressure delivers more hydraulic muscle to power demanding attachments and deliver superior lifting and breakout forces.
  • Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
  • Standard auxiliary detent allows the operator to set attachment for continuous operation.
  • Standard Hydraglide™ ride control system allows the lift arm to “float” when transporting loads, minimizing loss of material, and increased operator comfort.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Pilot-controlled hydrostatic transmission with direct engine coupling provides high operating efficiency.
High-Flow Hydraulics - Option (L/min) 40.8 gpm (154)


Lift Arm

Gehl V400 Vertical Lift Arm

The V400 skid loader vertical-lift arm design was created for maximum reach, superior strength and optimal operator visibility.

  • Low-profile lift arm design provides outstanding forward and side visibility.
  • Single-plane lift arm design features a heavy-duty timing link, upper-rear channel support and large diameter pivot pins, providing best-in-class vertical and lateral strength and rigidity, as well as exceptional rear visibility.
  • Four-point support through dual bucket cylinders and two lift arm stop blocks on the front of the main frame evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 144" (3647)

Serviceability

At Gehl we know ease of serviceability is very important to our customers. The model V400 skid loader is sure to exceed their expectations.

  • Large engine cover is hinged and positioned by gas-springs to assist lifting and holding in place, and allows for easy return to closed/operating position.
  • Large rear door easily opens on hinges on right side, allowing full access for servicing and maintenance.
  • Swing-out cooler provides improved access to engine bay area.
  • Entire cabin structure tilts rearward with a gas strut/spring for easy internal service access.
  • Drive chains and axle bearings are sealed systems that require no maintenance.
  • Coded wiring takes the guesswork out of electrical system identification.
  • Cabin filter is located on the top of the operator structure allowing it to pull more clean, fresh air and less debris.
  • Rear side panels can be removed with the lift arm in the raised or lowered position.
  • Hydraulic tank dipstick allows for simple and fast hydraulic fluid checks.
  • Check engine coolant quickly through the handy sight gauge.
Gehl V400 Service Access
Show Standard   Show Metric

Specifications (standard)

Dimensions

A  Overall Operating Height - Fully Raised 186.8"
B  Height to Hinge Pin - Fully Raised 144"
C  Overall Height to Top of ROPS 82.0"
D  Ground Clearance to Chassis 7.3"
E  Overall Length with Bucket 158.5"
F  Overall Length without Bucket 121.5"
G  Wheelbase 54.6"
H  Dump Reach - Fully Raised 39.5"
I  Rollback at Ground 31°
J  Dump Angle 31°
K  Overall Width  79.5"
L  Bucket Width 84"
M  Clearance Circle - Rear 70.5"
N  Clearance Circle - Front without Bucket 50.8"
O  Clearance Circle - Front with Bucket 88.5"
P  Seat to Ground Height 40.8"
Q  Rollback at Specified Height 100°
R  Dump Height 114.8"
S  Departure Angle 19°
Standard Specification Tire Size 14.00 - 17.5 HD

Engine

Make Cummins
Model QSB 4.5 Tier III
Gross Power @ rpm 99 hp @ 2,200
Displacement 272 cu.in.
Maximum Torque @ rpm 326 ft.-lbs. @ 1,300

Hydraulic System

Auxiliary Hydraulics - Standard 32 gpm
High-Flow Auxiliary Hydraulics - Option 40.8 gpm
System Relief Pressure  3,500 psi
Reservoir Capacity 16.75 gal.

Capacities/Weights

Rated Operating CapacityA 4,000 lbs.
Fuel Tank 31.25 gal.
Travel Speed - Maximum 6.5 mph
Travel Speed with Two-Speed OptionB - Maximum 11.2 mph
Operating WeightC - Approximate 11,100 lbs.

A - Per SAE J818, SAE J732 and ISO 14397

B - Two-speed is optional on V270 and standard on V330

C - Weight of base unit with standard equipment, standard bucket and 175 lb. operator and full fuel tank

Gehl Vertical Lift V400 Specifications Diagram

Specifications (metric)

Dimensions

A  Overall Operating Height - Fully Raised 4745 mm
B  Height to Hinge Pin - Fully Raised 3647 mm
C  Overall Height to Top of ROPS 2083 mm
D  Ground Clearance to Chassis 185 mm
E  Overall Length with Bucket 4026 mm
F  Overall Length without Bucket 3086 mm
G  Wheelbase 1387 mm
H  Dump Reach - Fully Raised 1003 mm
I  Rollback at Ground 31°
J  Dump Angle 31°
K  Overall Width  2019 mm
L  Bucket Width 2134 mm
M  Clearance Circle - Rear 1791 mm
N  Clearance Circle - Front without Bucket 1290 mm
O  Clearance Circle - Front with Bucket 2248 mm
P  Seat to Ground Height 1036 mm
Q  Rollback at Specified Height 100°
R  Dump Height 2916 mm
S  Departure Angle 19°
Standard Specification Tire Size 14.00 - 17.5 HD

Engine

Make Cummins
Model QSB 4.5 Tier III
Gross Power @ rpm 74 kW @ 2200
Displacement 4.5 L
Maximum Torque @ rpm 442 Nm @ 1300

Hydraulic System

Auxiliary Hydraulics - Standard 121 L/min
High-Flow Auxiliary Hydraulics - Option 154 L/min
System Relief Pressure  241.3 bar
Reservoir Capacity 63 L

Capacities/Weights

Rated Operating CapacityA 1814 kg
Fuel Tank 118 L
Travel Speed - Maximum 10.5 km/hr
Travel Speed with Two-Speed OptionB - Maximum 18 km/hr
Operating WeightC - Approximate 5035 kg

A - Per SAE J818, SAE J732 and ISO 14397

B - Two-speed is optional on V270 and standard on V330

C - Weight of base unit with standard equipment, standard bucket and 79 kg operator and full fuel tank

Gehl Vertical Lift V400 Specifications Diagram

Options

Control Patterns

Gehl T-Bar Controls - Servo Optional
Hand/Foot Controls - Pilot Optional
Joystick Controls - Pilot Standard
Dual-Hand Controls Available

Engine

Engine Auto-Shutdown System Standard
Engine Pre Heater Standard
Turbo-charged Engine Standard

Hydraulics

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional
Independent Hydraulic Reservoir

Operator Station

Adjustable Arm Rests/Control Towers Standard
Air-Conditioning Optional
Air Ride Seat Optional
Cab Enclosure Optional
Foot and Hand Throttles Standard
Full Instrumentation Standard
Heating Optional
Horn Standard
Integral Access Plate (Removable) Standard
Operator Restraint Bar Standard
ROPS/FOPS Level II Overhead Guard Standard
Sound Reduction Material Standard
Suspension Seat - Mechanical Standard
Work Lights - Front and Rear Standard

Performance

All-Tach® Attachment Mounting System Standard
Power-A-Tach® Attachment Mounting System Optional
Anti-Vandalism Protection Standard
Back-Up Alarm Optional
Brake Control (Auto/Manual)/td> Standard
Counterweight
Hydraglide™ Ride Control Standard
Hydraloc™ Safety System Standard
Hydrostatic Drive - Servo Standard
Lift Arm Support Device Standard
Self-Leveling Lift Action Standard
Two-Speed Drive Standard

Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter