RT165 Track Loader

  • Rated Operating Capacity at 35% Tipping Load (kg): 1,650 lbs. (748)
  • Net Power (kW): 68.4 hp (51)
  • Lift Height (mm): 119.6" (3038)
Brochure Find a Dealer Request More Info
RT165 Front

Performance

The Gehl RT165 Compact Track Loader is taking performance to the next level.

  • Tier IV-certified Yanmar diesel engines provide 69.9 hp (52.1 kW)
  • The welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Optional rear bumper/counterweight provides additional protection and towing capability.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Height to Hinge Pin - Fully Raised (mm) 119.6" (3038)

Operator's Cabin

Gehl RT165 Compact Track Loader Cabin

The extra-large, state-of-the art operator’s station on the RT165 Track Loader is designed for optimal operator comfort resulting in more productivity.

  • Cab forward design enhances the view to the bucket.
  • Level II FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.

Controls

Gehl RT165 Track Loader Controls

Controls on the Gehl RT165 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

  • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
  • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
  • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
    • Joystick Sensitivity
    • Position Reaction
    • Engine Response
    • AntiStall
    • Pump Swash Plate Position
  • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.

Engine

The RT165 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders (L) 201.4 cu.in. (3.319 L / 4)
Gross Power (kW) @ rpm 69.9 hp (52.1) @ 2500
Net Power (kW) @ rpm 68.4 hp (51) @ 2500
Peak Torque (Nm) @ rpm 178 ft.-lbs. (241) @ 1625
Oil Pump Capacity (L) 11 qts. (10.4)
Alternator Voltage/Amperage 14V/100A
Gehl Track Loader RT165 Engine Access

Hydraulics

The RT165 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency and AntiStall technology keeps the power flowing.
  • Power track drive motors deliver superior pushing power.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
Auxiliary Hydraulic Flow - Rated Speed (L/min) 18.9 gpm (71.4)
Hight-Flow Hydraulic Flow - Rated Speed (L/min) 28.5 gpm (119)
Transmission Pump Type Axial Piston
Motor Type Radial Piston

Attachment System

The RT165 Compact Track Loader is available with your choice of two attachment mounting systems designed to enhance jobsite efficiency.

  • All-Tach® system manually engages and disengages with a single lever.
  • Power-A-Tach® system allows for attachment changes electronically at the push of a button, further enhancing jobsite productivity.
  • Both systems are compatible with all universal-style track loader attachments.
EDGE Attachments for RT165

Lift Arm

Gehl RT165 Compact Track Loader Hydraulics

The robust lift-arm on the RT165 Compact Track Loader is designed for optimal strength, visibility and capacity.

  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 119.6" (3038)
Reach - Fully Raised (mm) 25.3" (641)

Serviceability

Serviceability is very important to our customers. The RT165 is sure to exceed your service expectations.

  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
  • Coded wiring takes the guesswork out of electrical system identification.
Show Standard   Show Metric

Specifications (standard)

Dimensions

A  Overall Operating Height - Fully Raised 157.8"
B  Height to Hinge Pin - Fully Raised 119.6"
C  Reach - Fully Raised 25.3"
D  Dump Angle - Fully Raised 39°
E  Dump Height - Fully Raised 91.7"
F  Maximum Rollback Angle - Fully Raised 98°
G  Overall Height at ROPS 77.5"
H  Overall Length with Bucket - Standard Counterweight 126.2"
I  Overall Length without Bucket - Standard Counterweight 94.2"
J  Specified Height 64.5"
K  Reach at Specified Height 53.9"
L  Dump Angle at Specified Height 70°
M  Maximum Rollback Angle at Ground 28°
N  Carry Position 7.8"
O  Maximum Rollback Angle at Carry Position 28°
P  Digging Position - Below Ground 2.1"
Q  Angle of Departure with Standard Counterweight 28°
R  Ground Clearance 7.25"
S  Track Gauge 53.4"
T  Track Shoe Width 12.6"
U  Crawler Base 49.8"
V  Overall Width - Less Bucket 66.0"
W  Bucket Width 66.0"
X  Clearance Radius - Front With Bucket 77.9"
Z  Clearance Radius - Rear with Standard Counterweight 56.7"
Maximum Rollback at Specified Height  68.6°
Angle of Approach 90°
Grouser Height 1"

Capacity

Operating Capacity at 35% Tipping Load 1,650 lbs.
Operating Capacity at 50% Tipping Load 2,357 lbs.
Tipping Load 4,715 lbs.
Operating Weight 8,020 lbs.

Engine

Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 201.4 cu.in./4
Gross Power @ rpm 69.3 hp @ 2500
Net Power @ rpm 68.4 hp @ 2500
Peak Torque @ rpm N/A
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V/100A

Track Drives

Drawbar Pull/Tractive Effort 9,578 lbs.
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 12.6"
Ground Pressure - Narrow / Wide 6.5 / 5.2 psi

Forces

Bucket Breakout - Tilt Cylinder 4,230 lbs.
Bucket Breakout - Lift Cylinder 5,060 lbs.
Ground Speed - Single Speed 6.5 mph
Ground Speed - Two Speed 10.0 mph

Volume

Fuel Tank 16.5 gal.
Hydraulic Reservior Tank 11 gal.
Coolant Capacity 3.8 gal.

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 18.9 gpm
High-Flow Hydraulic Flow - Rated Speed 28.5 gpm
Transmission Pump Type Axial Piston Variable Double Pump
Motor Type Radial Piston Motor w/ Two Speed

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ 0°F


Gehl Compact Track Loader RT250 Specifications Diagram

Specifications (metric)

Dimensions

A  Overall Operating Height - Fully Raised 4008 mm
B  Height to Hinge Pin - Fully Raised 3038 mm
C  Reach - Fully Raised 642 mm
D  Dump Angle - Fully Raised 39°
E  Dump Height - Fully Raised 2329 mm
F  Maximum Rollback Angle - Fully Raised 98°
G  Overall Height at ROPS 1969 mm
H  Overall Length with Bucket - Standard Counterweight 3205 mm
I  Overall Length without Bucket - Standard Counterweight 2393 mm
J  Specified Height 1638 mm
K  Reach at Specified Height 1369 mm
L  Dump Angle at Specified Height 70°
M  Maximum Rollback Angle at Ground 28°
N  Carry Position 198 mm
O  Maximum Rollback Angle at Carry Position 28°
P  Digging Position - Below Ground 2.1 mm
Q  Angle of Departure with Standard Counterweight 28°
R  Ground Clearance 184 mm
S  Track Gauge 1356 mm
T  Track Shoe Width 320 mm
U  Crawler Base 1265 mm
V  Overall Width - Less Bucket 1676 mm
W  Bucket Width 1676 mm
X  Clearance Radius - Front With Bucket 1979 mm
Z  Clearance Radius - Rear with Standard Counterweight 1440 mm
Maximum Rollback at Specified Height  68.6°
Angle of Approach 90°
Grouser Height 25 mm

Capacity

Operating Capacity at 35% Tipping Load 748 kg
Operating Capacity at 50% Tipping Load 1069 kg
Tipping Load 2139 kg
Operating Weight 3638 kg

Engine

Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 3.319 L/4
Gross Power @ rpm 51.7 kW @ 2500
Net Power @ rpm 51.0 kW
Peak Torque @ rpm N/A
Oil Pump Capacity 11 L
Alternator Voltage/Amperage 14V/100A

Track Drives

Drawbar Pull/Tractive Effort 4345 kg
Track Type/Track Rollers/Roller Type Rubber/4/Steel
Track Width 320 mm
Ground Pressure 0.45 / 0.36 bar

Forces

Bucket Breakout - Tilt Cylinder 1919 kg
Bucket Breakout - Lift Cylinder 2295 kg
Ground Speed - Single Speed 10.5 km/hr
Ground Speed - Two Speed 16.1 km/hr

Volume

Fuel Tank 62.5 L
Hydraulic Reservior Tank 41.6 L
Coolant Capacity 14.4 L

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 71.4 L/min
High-Flow Hydraulic Flow - Rated Speed 119 L/min
Transmission Pump Type Axial Piston Variable Double Pump
Motor Type Radial Piston Motor w/ Two Speed

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ -18°C


Gehl Compact Track Loader RT250 Specifications Diagram

Manuals

Options

Performance

All-Tach® Mounting System Standard
IdeaTrax™ Exclusive Standard
Power-A-Tach® Mounting System Optional
Selectable Self-Leveling Hydraulic Lift Action Optional
Selectable Self-Leveling Lift Action Optional
Two-Speed Drive Standard
12-Volt Battery Standard

Engine

Engine Alert System with Error Display Standard
Engine Automatic Shutdown System Standard
Glowplugs Starts Assist Standard
Dual-Element Air Cleaner with Indicator Standard

Hydraulic System

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional

Undercarriage

Elevated Planetary Final Drives Standard
Maintenance Free Rollers Each Side 3
Single Flange Front/Dual Flange Rear Idlers Standard
Rubber Track Undercarriage System Standard
Servo-Controlled Hydrostatic Drive Standard

Structure

Back-up Alarm Optional
Combination Radiator & Hydraulic Oil Cooler Standard
ROPS/FOPS Level II Overhead Guard Standard
Anti-Vandalism Lock Provisions Standard
Mechanical Lift Cylinder Lock Standard

Operator's Station

Pressurized Cab Enclosure with A/C Optional
Multi-Function Function Display Screen Standard
Electronic Attachment Control - 14-Pin Connector Optional
Foot Throttle Standard
Full-Suspension Seat Standard
Air Suspension Seat Optional


Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter