RT250 GEN:3 Track Loader

  • Rated Operating Capacity at 35% Tipping Load (kg): 2,500 lbs. (1134)
  • Gross Power (kW): 74.3 hp (55.4)
  • Lift Height (mm): 128" (3251)
Brochure Find a Dealer Request More Info

Performance

The Gehl RT250 GEN:3 Compact Track Loader was designed from the ground up to be the top performing machine on the jobsite.

  • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Height to Hinge Pin - Fully Raised (mm) 168" (4267)
Operating Capacity at 35% Tipping Load with Optional Counterweight (kg) 2,500 lbs. (1134)
Ground Speed - Standard 2-Speed (km/hr) 8.2 mph (13.2)

Operator's Cabin

The extra-large, state-of-the art operator’s station on the new RT250 GEN:3 Compact Track Loader is designed for optimal operator comfort resulting in all-day productivity on the jobsite.

  • Cab forward design enhances the view to the bucket. Level II ROPS/FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Fully adjustable controls mounted to a standard mechanical suspension seat or an optional air-ride seat deliver outstanding comfort and precision control by moving with the operator during operation.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
  • Optional pressurized sealed cab enclosure with heat/AC, sound reduction material and rear-mounted air filter provide a comfortable, clean and quiet operating environment.

Controls

Controls on the RT250 GEN:3 Compact Track Loaders are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.

  • Electro-hydraulic joystick controls provide the ultimate in operator comfort and controllability. They are also not affected during cold weather operation.
  • Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Optional speed control adds ability to tailor machine operating speeds to application, independent of engine rotation.
  • Standard ISO drive pattern, optional selectable ISO and dual hand (H-pattern) controls.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
  • Standard Drive Sensitivity Adjustment offers five settings that change five parameters to suit operator preference, skill and application requirements. Adjustable settings include:
    • Joystick Sensitivity
    • Position Reaction
    • Engine Response
    • AntiStall
    • Pump Swash Plate Position
  • Optional HydraGlide™ system allows the lift arm to "float" when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.

Engine

The Gehl RT250 GEN:3 Compact Track Loader engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.

  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Gehl parts and service support.
Make/Model Deutz/TD 3.6 Tier 4
Type 4-Stroke Turbo
Displacement/Cylinders (L) 221 cu.in. (3.6)/4
Gross Power (kW) @ rpm 74.3 hp (55.4) @ 2300
Net Power (kW) @ rpm 70.7 hp (52.7) @ 2300
Peak Torque (Nm) @ rpm 243 ft.-lbs. (330) @ 1500
Oil Pump Capacity (L) 9 qts. (8.5)
Alternator Voltage/Amperage 14V/95A
Gehl RT250 Engine

Hydraulics

The Gehl RT250 GEN:3 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.

  • Standard and optional high-flow auxiliary hydraulics are designed to handle virtually every flow/high performance attachment.
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency and AntiStall technology keeps the power flowing.
  • Powerful drive motors deliver superior pushing power to the tracks.
  • Internal drive motor plumbing protects hoses, tubes and fittings from damage resulting from debris or objects in the track area.
  • Power track drive motors deliver superior pushing power.
  • Optional Hydraglide™ system allows the lift arm to “float” when transporting loads, minimizing loss of material and providing a smoother ride at faster transport speeds.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
Auxiliary Hydraulic Flow - Rated Speed (L/min) 24.9 gpm (94.3)
Hight-Flow Hydraulic Flow - Rated Speed (L/min) 37.4 gpm (141.6)

Attachment System

The Gehl RT250 GEN:3 Compact Track Loader is available with your choice of two attachment mounting systems designed to enhance jobsite efficiency.

  • All-Tach® system manually engages and disengages with a single lever.
  • Power-A-Tach® system allows for attachment changes electronically at the push of a button, further enhancing jobsite productivity.
  • Both systems are compatible with all universal-style track loader attachments.

Lift Arm

Gehl RT250 Track Loader Hydraulics

The robust lift-arm on the RT250 GEN:3 Compact Track Loader is designed for optimal strength, visibility and capacity.

  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Height to Hinge Pin - Fully Raised (mm) 168" (4267)

Serviceability

Serviceability is very important to our customers. The RT250 GEN:3 is sure to exceed your service expectations.

  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.
  • Entire ROPS/FOPS assembly tilts rearward with large gas-springs for easy internal service access.
  • Track rollers and idlers are sealed and require no maintenance.
  • Patented tilt-out foot pod allows for best-in-class foot well cleanout and provides perfect access to the fuel tank and other components under the cab.
  • Coded wiring takes the guesswork out of electrical system identification.
Gehl Track Loader RT250 Service Access
Show Standard   Show Metric

Specifications (standard)

Dimensions

A  Overall Operating Height - Fully Raised 168"
B  Height to Hinge Pin - Fully Raised 128"
C  Reach - Fully Raised 34.5"
D  Dump Angle - Fully Raised 41°
E  Dump Height - Fully Raised 98"
F  Maximum Rollback Angle - Fully Raised 102.5°
G  Overall Height at ROPS 83.1"
H  Overall Length with Bucket - Standard Counterweight 157.8"
I  Overall Length without Bucket - Standard Counterweight 126.8"
J  Specified Height 67.7"
K  Reach at Specified Height 31.1"
L  Dump Angle at Specified Height 75°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 8.2"
O  Maximum Rollback Angle at Carry Position 31.6°
P  Digging Position - Below Ground +0.5"
Q  Angle of Departure with Standard Counterweight 25°
R  Ground Clearance 13.2"
S  Track Gauge 51.7"
T  Track Shoe Width 17.7"
U  Crawler Base 61.5"
V  Overall Width - Less Bucket 69.5"
W  Bucket Width 83.9"
X  Clearance Radius - Front With Bucket 98.4"
Z  Clearance Radius - Rear with Standard Counterweight 70.7"
Maximum Rollback at Specified Height  66.8°
Angle of Approach 90°
Grouser Height 1"

Capacity

Operating Capacity at 35% Tipping Load 2,500 lbs.
Operating Capacity at 50% Tipping Load 3,571 lbs.
Tipping Load 7,143 lbs.
Operating Weight 11,470 lbs.

Engine

Make/Model Deutz/TD 3.6 Tier 4
Type 4-Stroke Turbo
Displacement/Cylinders 221 cu.in./4
Gross Power @ rpm 74.3 hp @ 2300
Net Power @ rpm 70.7 hp @ 2300
Peak Torque @ rpm 243 ft.-lbs. @ 1500
Oil Pump Capacity 9 qts.
Alternator Voltage/Amperage 14V/95A

Track Drives

Drawbar Pull/Tractive Effort 12,770 lbs.
Track Type/Track Rollers/Roller Type Rubber/5/Steel
Track Width 17.7"
Ground Pressure 5.3 psi

Forces

Bucket Breakout - Tilt Cylinder 8,384 lbs.
Bucket Breakout - Lift Cylinder 7,437 lbs.
Ground Speed - Single Speed 5.8 mph
Ground Speed - Two Speed 8.2 mph

Volume

Fuel Tank 24 gal.
Hydraulic Reservior Tank 13.8 gal.
Coolant Capacity 5.1 gal.

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 24.9 gpm
High-Flow Hydraulic Flow - Rated Speed 37.4 gpm
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ 0°F


Gehl Compact Track Loader RT250 Specifications Diagram

Specifications (metric)

Dimensions

A  Overall Operating Height - Fully Raised 4267 mm
B  Height to Hinge Pin - Fully Raised 3251 mm
C  Reach - Fully Raised 876 mm
D  Dump Angle - Fully Raised 41°
E  Dump Height - Fully Raised 2489 mm
F  Maximum Rollback Angle - Fully Raised 102.5°
G  Overall Height at ROPS 2111 mm
H  Overall Length with Bucket - Standard Counterweight 4008 mm
I  Overall Length without Bucket - Standard Counterweight 3221 mm
J  Specified Height 1720 mm
K  Reach at Specified Height 795 mm
L  Dump Angle at Specified Height 75°
M  Maximum Rollback Angle at Ground 30°
N  Carry Position 208 mm
O  Maximum Rollback Angle at Carry Position 31.6°
P  Digging Position - Below Ground 13 mm
Q  Angle of Departure with Standard Counterweight 25°
R  Ground Clearance 335 mm
S  Track Gauge 1313 mm
T  Track Shoe Width 450 mm
U  Crawler Base 1562 mm
V  Overall Width - Less Bucket 1765 mm
W  Bucket Width 2131 mm
X  Clearance Radius - Front With Bucket 2499 mm
Z  Clearance Radius - Rear with Standard Counterweight 1796 mm
Maximum Rollback at Specified Height  66.8°
Angle of Approach 90°
Grouser Height 25 mm

Capacity

Operating Capacity at 35% Tipping Load 1134 kg
Operating Capacity at 50% Tipping Load 1620 kg
Tipping Load 3240 kg
Operating Weight 5203 kg

Engine

Make/Model Deutz/TD 3.6 Tier 4
Type 4-Stroke Turbo
Displacement/Cylinders 3.6 L/4
Gross Power @ rpm 55.4 kW @ 2300
Net Power @ rpm 52.7 kW @ 2300
Peak Torque @ rpm 330 Nm @ 1500
Oil Pump Capacity 8.5 L
Alternator Voltage/Amperage 14V/95A

Track Drives

Drawbar Pull/Tractive Effort 5792 kg
Track Type/Track Rollers/Roller Type Rubber/5/Steel
Track Width 450 mm
Ground Pressure 0.37 bar

Forces

Bucket Breakout - Tilt Cylinder 3803 kg
Bucket Breakout - Lift Cylinder 3373 kg
Ground Speed - Single Speed 9.3 km/hr
Ground Speed - Two Speed 13.2 km/hr

Volume

Fuel Tank 91 L
Hydraulic Reservior Tank 52.2 L
Coolant Capacity 19.3 L

Hydraulics

Auxiliary Hydraulic Flow - Rated Speed 94.3 L/min
High-Flow Hydraulic Flow - Rated Speed 141.6 L/min
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear Box Reduction

Electronic System

Battery Volts 12V
Cold Cranking Amps at Temperature 950 CCA @ -18°C


Gehl Compact Track Loader RT250 Specifications Diagram

Options

Performance

All-Tach® Mounting System Standard
IdealTrax™ Exclusive Standard
Straight Tracking Standard
Power-A-Tach® Mounting System Optional
Self-Leveling Hydraulic Lift Action Standard
Selectable Self-Leveling Lift Action Optional
Two-Speed Drive Standard
12-Volt Battery Standard

Engine

Engine Alert System with Error Display Standard
Engine Automatic Shutdown System Standard
Grid/Manifold Heater Starter Assist Standard
Dual-Element Air Cleaner with Indicator Standard

Hydraulic System

Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional

Undercarriage

Elevated Planetary Final Drives Standard
Maintenance Free Rollers Each Side 4
Single Flange Front/Dual Flange Rear Idlers Standard
Rubber Track Undercarriage System Standard
Servo-Controlled Hydrostatic Drive Standard
Dedicated Undercarriage Standard

Structure

Tilt-out Foot Pod Exclusive Standard
Back-up Alarm Standard
Combination Radiator & Hydraulic Oil Cooler Standard
ROPS/FOPS Level II Overhead Guard Standard
Anti-Vandalism Lock Provisions Standard
Mechanical Lift Cylinder Lock Standard

Operator's Station

Pressurized Cab Enclosure with A/C Optional
Fold-Up Door Optional
Multi-Function Function Display Screen Standard
Drive Sensitivity System Standard
Electronic Attachment Control - 14-Pin Connector Optional
Electro-Hydraulic Joystick Controls Standard
Selectable Control Pattern Configuration Optional
Variable Speed Control, Selectable On & Off Optional
Foot Throttle Standard
Full-Suspension Seat Standard
Air Suspension Seat Optional


Warranty

Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty

Sign Up For Our Newsletter