Articulated loaders

AL330

Articulated loaders

There's no cutting corners in your line of work, and you need a machine with the same attitude. Strong and nimble, the AL330 Articulated Loader combines the power you need to finish a hard day's work with the ability to maneuver in tight and confined spaces that other comparable machines can't operate in. It's a smaller machine that solves big challenges, especially when it comes to out-of-reach materials. When compared to the AL320, the AL330 features a longer boom that delivers the reach you need to stay productive from morning until night. And because of its compact size and narrow width, it easily transports to different job sites and wherever else your get-up-and-get-it-done spirit is needed.

See more See less
965 kg
1270 kg
2.83 m
24.70 Hp
Learn more about the GEHL warranty

Technical features

Capacities

Static tipping load with bucket (straight)

1270 kg

Static tipping load with bucket (full turn)

1115 kg

Static tipping load with forks (straight)

965 kg

Static tipping load with forks (full turn)

845 kg

Max. height of bucket pivot point

2.83 m

Weight and dimensions

Unladen weight (with forks) with 4-post canopy

2170 kg

Wheelbase

1.65 m

Overall cab width

0.99 m

Overall height with 4 posts canopy

2.25 m

Dump reach - Full height

479 mm

Overall Operating Height - Fully Raised

3.69 m

Articulation angle

45 °

Maximum oscillation angle

10 °

Overall length with bucket

4.15 m

Overall width less bucket

1.10 m

Overall length - Less Bucket

3.45 m

Rear overhang

0.99 m

Dump angle - Fully raised

42 °

Dump Height - Fully Raised

2.12 m

Maximum Rollback Angle - Fully Raised

48 °

Maximum Rollback Angle at Ground

49 °

Digging Position

-79 mm

Ground clearance

320 mm

Clearance Radius - Front with Bucket

3.24 m

Ground Plane to Bucket Edge Height

2.65 m

Tread width (wheel center)

836 mm

Attachment Pivot Clearance

103 mm

Height from ground to axle center

214 mm

Bucket Width

1.52 m

Front Wheel Center to Pivot Pin

0.66 m

Height to Hinge Pin – Fully Raised

2.52 m

Engine

Engine brand

Perkins

Engine model

403J-17

Engine norm

Stage V

Number of cylinders

3

I.C. Engine power rating / Power

24.70 Hp / 18.40 kW

Max. torque / Engine rotation

85 Nm / 1800 rpm

Engine cooling system

Water

Transmission

Transmission type

Hydrostatic

Number of gears (forward / reverse)

2 / 2

Max. travel speed (may vary according to applicable regulations)

20 km/h

Parking brake

Mechanical hand-operated parking brake

Service brake

Inching Brake

Hydraulics

Hydraulic pump type

Gear pump

Hydraulic flow - Pressure

30 l/min / 207 bar

Drive hydraulic system pressure

207 bar

Tank capacities

Hydraulic oil

24 l

Fuel tank

45 l