Articulated loaders

AL330

Articulated loaders

There's no cutting corners in your line of work, and you need a machine with the same attitude. Strong and nimble, the AL330 Articulated Loader combines the power you need to finish a hard day's work with the ability to maneuver in tight and confined spaces that other comparable machines can't operate in. It's a smaller machine that solves big challenges, especially when it comes to out-of-reach materials. When compared to the AL320, the AL330 features a longer boom that delivers the reach you need to stay productive from morning until night. And because of its compact size and narrow width, it easily transports to different job sites and wherever else your get-up-and-get-it-done spirit is needed.

See more See less
1250 kg
1650 kg
2.84 m
2.26 m
Learn more about the GEHL warranty

Technical features

Capacities

Static tipping load with bucket (straight)

1650 kg

Static tipping load with bucket (full turn)

1450 kg

Static tipping load with forks (straight)

1250 kg

Static tipping load with forks (full turn)

1095 kg

Max. height of bucket pivot point

2.84 m

Max. lifting height (below forks)

2.60 m

Bucket hinge pin height (retracted)

2900 mm

Weight and dimensions

Unladen weight (with forks) with 4-post canopy

2400 kg

Wheelbase

1.65 m

Overall cab width

0.99 m

Overall height with 4 posts canopy

2.26 m

Overall height with cab

2.26 m

Dump reach - Full height

479 mm

Overall Operating Height - Fully Raised

3696 mm

External turning radius (over tyres)

2.77 m

Articulation angle

45 °

Overall length with bucket

4.15 m

Overall width less bucket

1.10 m

Overall length - Less Bucket

3.46 m

Rear overhang

1 m

Dump angle - Fully raised

42 °

Dump Height - Fully Raised

2170 mm

Maximum Rollback Angle - Fully Raised

48 °

Maximum Rollback Angle at Ground

49 °

Digging Position

79 mm

Ground clearance

320 mm

Clearance Radius - Front with Bucket

3.25 m

Ground Plane to Bucket Edge Height

2665 mm

Attachment Pivot Clearance

170 mm

Bucket Width

1.52 m

Front Wheel Center to Pivot Pin

0.67 m

Height to Hinge Pin – Fully Raised

2900 mm

Engine

Engine brand

Perkins

Engine model

403J-17

Engine norm

Stage V

Number of cylinders

3

Power (kW)

18.40 kW

Max. torque / Engine rotation

90 Nm / 2800 rpm

Engine cooling system

Water

Transmission

Transmission type

Hydrostatic

Number of gears (forward / reverse)

2 / 2

Max. travel speed (may vary according to applicable regulations)

20 km/h

Parking brake

Mechanical hand-operated parking brake

Service brake

Inching Brake

Hydraulics

Hydraulic pump type

Gear pump

Hydraulic flow - Pressure

30 l/min / 207 bar

High-Flow Option (l/min)

30 l/min

Drive hydraulic system pressure

207 bar

Tank capacities

Hydraulic oil

24 l

Fuel tank

45 l