Articulated loaders


Articulated loaders

A compact powerhouse, the AL530 is one of our smallest Articulated Loaders equipped with a Z-kinematic loader arm, delivering unmatched break-out forces to handle the toughest challenges. This machine's responsive hand throttle and 2-speed hydrostatic transmission get you to the task at hand, and its front and rear differential locks ensure you have traction exactly when and where you need it. Small machine. Big performance. The AL530 is ready to get the job done—just like you.

See more See less
1472 kg
1880 kg
3.07 m
2.29 m
Learn more about the GEHL warranty


Technical features


Static tipping load with bucket (straight)

1880 kg

Static tipping load with bucket (full turn)

1650 kg

Static tipping load with forks (straight)

1472 kg

Static tipping load with forks (full turn)

1292 kg

Max. height of bucket pivot point

3.07 m

Max. lifting height (below forks)

3.87 m

Max. outreach

0.48 m

Reach at max. height

0.45 m

Bucket hinge pin height (extended)

0.46 m

Weight and dimensions

Unladen weight (with forks) with 4-post canopy

2850 kg

Overall chassis length (without hitch)

3.79 m


1.77 m

Overall cab width

1 m

Overall height with FOPS removed and ROPS folded

2.29 m

Overall height with 4 posts canopy

2.29 m

Overall height with cab

2.29 m

Dump reach - Full height

0.46 m

Overall Operating Height - Fully Raised

3.87 m

Tilt-up angle

50 °

Tilt-down angle

47 °

External turning radius (over tyres)

3.36 m

Articulation angle

40 °

Overall length with bucket

4.49 m

Overall width less bucket

1.33 m

Overall length - Less Bucket

3.79 m

Rear overhang

1.15 m

Dump angle - Fully raised

47 °

Dump Height - Fully Raised

2.30 m

Maximum Rollback Angle - Fully Raised

46 °

Maximum Rollback Angle at Ground

50 °

Digging Position

72 mm

Ground clearance

360 mm

Clearance Radius - Front with Bucket

3361 mm

Clearance Radius - Less bucket

2888 mm

Bucket Width

1.52 m

Front Wheel Center to Pivot Pin

0.73 m

Height to Hinge Pin – Fully Raised

3.07 m


Engine brand


Engine model


Engine norm

Stage V

Number of cylinders


Power (kW)

36 kW

Max. torque / Engine rotation

166 Nm / 2200 rpm

Engine cooling system



Transmission type


Number of gears (forward / reverse)

2 / 2

Max. travel speed (may vary according to applicable regulations)

20 km/h


Hydraulic pump type

Gear pump

Hydraulic flow - Pressure

60 l/min / 207 bar

High-Flow Option (l/min)

60 l/min

Drive hydraulic system pressure

207 bar

Tank capacities

Hydraulic oil

50 l

Fuel tank

65 l